Telenot telephone dialer comline 1004 (GSM)

Used

Item Specifics

Item Condition:	Used :
Seller’s notes:	“functional when expanded“

Brand:	Telenot	Country and region of manufacture:	Germany
Product:	GSM telephone dialer
Model:	Telenot telephone dialer comline 1004 (GSM)

The comline 1004 (GSM) transmission device is used to transmit hazard messages and/or technical alarms exclusively via the GSM radio network. The transmission takes place in the form of digital signals to one or more alarm receiving devices (e.g. TELENOT ÜZ 7500, COMXline AE) and/or voice texts to any telephone subscriber. The transmitted reports are confirmed by a receipt telegram or MFV receipt code. The device can be parameterized in such a way that the program flow is stopped when the receipt is duly received. The ÜE can also be queried and switched remotely. Messages to GSM mobile phones or to Cityruf (pagers) can also be implemented. For recording and checking the speech texts to be transmitted, the ÜE has an integrated microphone and a control loudspeaker. The speech texts are stored in a non-volatile memory and can be randomly assigned to the reporting events.

The parameterization of the device is menu-driven, fast and user-friendly by means of a programming device

PR 7000 (item no. 100071090) or with the PC parameterization software “compas”

from version 12.0 (item no. 100071098).

The factory standard parameterization and test programs facilitate service.

The device is compatible with the AWAG/AWUG series 7000.

Key features

– GSM radio transmission path

– Remote parameterization via GSM

– Continuous automatic monitoring of the availability of GSM access

– Messages by means of data transmission to an alarm receiving device

– Voice text messages to any telephone connection

– Message transmission as SMS

– 10 target numbers with 20 digits each can be parameterized

– 10 identification numbers with 12 digits each can be parameterized

– Free assignment of the target numbers as well as the identification numbers and the dialing sequence to the reporting lines

– Number of call attempts, the number of cycles and the time between cycles can be parameterized

– Parallel S1 interface according to VdS 2463 with 4 signaling line inputs

– Parallel S1 interface with system connector for ribbon line connection

– Activation of the detection lines by resistance monitoring, opening, closing or individually parameterizable as a status function

– Free assignment of different signal types (message texts at the alarm receiving device) to the message lines or message line states

– Free assignment of language texts to the reporting lines

– Separate inputs for the transmission of mains or battery faults with parameterizable delay times

– Fault relay output

– Universal, parameterizable relay output

– 1 remote relay output

– 4 different routine operating modes (test messages) can be parameterized

– Alarm line shutdown function

– Integrated event memory with real-time clock

– Continuous self-monitoring of the transmission device