Telenot Telephone Dialer 2016 with Voice Module

Item Specifics

The devices of the comline 2016 series are intended for operation on an analogue telephone connection.

The devices are used to transmit hazard messages (burglary, robbery, fire, etc.) as well as technical alarms (operating states, limit value, faults).

The main features of the comline 2016 transmission device

• Message transmission 10 baud with TELENOT/TELIM protocol via the telephone connection
• Message transmission 1200 baud with VdS protocol 2465 via telephone connection
• Messages via lost and found services (Cityruf), D1-AlphaService and D2-Message (modem) possible
• Automatic monitoring of the availability of the telephone connection
• Free assignment of the target numbers and the dialing sequence to the reporting lines
• 10 phone numbers, 10 identification numbers can be parameterized
• Number of call attempts can be freely parameterized (number of cycles and time between cycles)
• Parallel interface for burglary / robbery reports according to VdS 2463 with 8 message line inputs
• serial interface S1 according to VdS 2463 available in comline 2016S
• Activation can be parameterized for each reporting line: opening, closing or status function
• Resistance monitoring of signaling lines 1 to 8 programmable
• Free assignment of different message texts (signal types) to the message lines or message line states
• Separate inputs for transmission of mains or battery interference with programmable delay times
• 4 Routine Operating Modes
• ML shutdown function depending on the state of another message line
• Integrated event memory, real-time clock and constant self-monitoring
• Service-friendly thanks to built-in test programs and factory standard programming
• Installation-compatible with the AWAG / AWUG series 7000
• Parameterization with the PR 7000 programming device or with the PS software “compas” (from verse 8.8)
• Remote parameterization with V.22 modem in preparation