Relay Interface Module RIM 35 CP

Relay Interface Module RIM 35 CP

VdS-approved, accessories of the aspirating smoke detector The aspirating smoke detectors of the SecuriRAS ASD family are characterized by a wide range of applications in numerous areas of application. Supplemented by filters, separators and blow-out devices, reliable early fire detection can be achieved even in difficult environmental conditions. Highly sensitive and intelligent smoke sensors automatically block out dust particles and, thanks to the integrated fire parameter pattern comparison, represent a technical measure to avoid false alarms in accordance with DIN VDE 0833-2. The air sampling smoke detectors are approved for classes A, B and C in accordance with DIN EN 54-20. Depending on the setting, the finest smoke particles are reliably detected. A fire alarm is triggered during the pyrolysis phase, i.e. before visible flames or smoke are generated. Aspirating smoke detectors are used when conventional fire detectors reach their limits. Typical areas of application are hard-to-reach rooms such as elevator shafts or transformer stations, large open or very high rooms, clean rooms or server rooms. The VdS-approved ASD PipeFlow planning software enables fast and reliable project planning of symmetrical and asymmetrical suction lines, including all accessory components. With the practical optimization function, the planning software always searches for the ideal balance of the suction lines, so that each suction opening has the same sensitivity. The efficient and user-friendly ASD Config software is used for commissioning and service. All important information, such as airflow and smoke values, are displayed graphically in real time for quick diagnosis. The RIM 35 CP relay interface module for use in the SecuriRAS ASD 535 aspirating smoke detector has 5 freely parameterizable relays for the transmission of additional information, such as pre-signal stages, contamination of the SSD 535-x smoke sensor or the intake line to a higher-level fire alarm system. All relays are designed as a potential-free changeover contact. Up to 2 RIM 35 CP relay interface modules can be operated in a SecuriRAS ASD 535 air sampling smoke detector. The module is installed directly in the air sampling smoke detector and has improved protection against humidity and aggressive gases (coated print).