Three-way ball valve MV 25 ABS SH
Part Number: 100078153 The MV 25 ABS SH
three-way ball valve is designed for cleaning the intake line
of aspirating smoke detectors with compressed air
and can be inserted directly into the
Available on backorder
Three-way ball valve MV 25 ABS SH
The MV 25 ABS SH three-way ball valve is intended for cleaning the intake line of aspirating smoke detectors with compressed air and can be installed directly in the suction line of the SecuriRAS ASD. The MV 25 ABS SH three-way ball valve in T-type with safety lever is suitable for the TU ABS intake manifold. The lockable multifunction lever with grid position of 90° protects the ball valve from unauthorized use. A 360° adjustment range is possible without a lever stop.
| Hersteller |
|---|
Related products
Smoke Aspiration System
Part Number: 100078148 pipe clip PC 25 PP, type GOEMA for quick and easy installation of intake pipes made of PVC and ABS.
Smoke Aspiration System
Part Number: 100078149 AD 20 ABS threaded ring as a threaded transition between the ABS tube with Ø 25 mm and the FT 21 PA hose with Ø 21.2 mm via the quick-release connectors
Smoke Aspiration System
Part Number: 100078134 The pipe blow-out valve is used in rooms with very high dust load at the end of the pipe. When cleaning with compressed air, the pipe blow-out
Smoke Aspiration System
Part Number: 100078150 The SP M20 ABS ceiling bushing set is suitable for the TU ABS intake pipe. The set is needed to collect air samples from a room with critical environmental conditions.
Smoke Aspiration System
Part Number: 100078158 Used to clean the bonding point of PVC /ABS components to ensure secure bonding.
Smoke Aspiration System
Part Number: 100078159 replacement cartridges for the Flow-Check tester.
Smoke Aspiration System
Part Number: 100078144 The SO 25 ABS sleeve is suitable for the TU ABS intake pipe.
Smoke Aspiration System
Part Number: 100078152 The MV 25 ABS three-way ball valve is designed for cleaning the intake line of air intake smoke detectors with compressed air and can be fed directly into the suction