hiplex 8400H S110 Intrusion Alarm Panel

hiplex 8400H S110

Intrusion alarm control panel

VSÖ-Class WS (W 170918/03 E) Switchgear
VSÖ-Class WS (W 170918/02 E) Burglar Detector Panel
VdS-Class C (G 117001) Burglar Detector Panel
VdS-Class C (G 117002) Switchgear
EN 50131-3: Grade 3

The hiplex 8400H is a burglar alarm control panel in accordance with the provisions, regulations and guidelines DIN EN 50131 Grade 3, VdS class C, VDE 0833 and the ÜEA guidelines of the police. The burglar alarm control panel is suitable for use in commercial, industrial and private sectors.

Different housing types are available for the different expansion levels.
The reader interface for connecting comlock/cryplock readers can be used not only as a switching device but also for access control.
The intrusion detector control panel is installed in a sturdy, sealable sheet steel housing with cable entries
.
The power supply 12 V / 34 Ah is integrated on the central board. A mounting station is available for the installation of a TELENOT transmission device.

With the BuildSec 4.0 alarm system app, it is possible to operate and display operating states in the burglar alarm control panel via smartphone and tablet. Supported operating systems are iOS and Android.

Using the parameterization software hipas-User, customers, operators and security services can perform functions such as
View and edit person code groups or person permissions, or read the event store.

Characteristics
– Bus-oriented system, based on the TELENOT system bus com2BUS
– Up to 15 independent security areas and 1 control panel protection area can be implemented
– Up to 512 reporting areas can be parameterized
– Up to 1000 codes can be parameterized
– 5 time models with 8 time ranges each can be parameterized
– Initial reporting
– Walk test function
– One-man revision
– Operation with exit/access path (e.g. external arming via control panel) possible
– Event storage
– VdS (4000 events)
– VdS sharp / out of focus (1000 events)
– Alarms (1000 events)
– Global (100,000 events)
– Expandable with up to 8 ISO expanders per com2BUS
– Expandable with up to 8 hislave 8000 expansion boards
– Expandable with up to 48 TM2 C2B daytime alarm modules
– Expandable with up to 48 comlock 410 door modules
– Expandable with up to 48 hilock 203 transceivers
– Expandable with up to 48 detector group modules 5-MGM C2B
– Parallel and serial interface (for detailed message transmission) to the transmission device
– Ethernet interface for connection to a router for remote service via hipas and operation via the BuildSec 4.0 alarm system app
– App-capable (alarm system app BuildSec 4.0)
– hiXServer-capable
– Interface for printers or for networking with building management system / EIB/KNX
– Integrated power supply 12 V / 34 Ah
– Firmware update possible via hipas parameterization software

Hiplex 8400H intrusion alarm control panel in S110 housing.

The S110 enclosure is a modular enclosure and offers 4 mounting slots for mounting plates.
One of the 4 mounting stations is equipped with a hiplex / S110/S120 mounting plate and a hiplex 8400H burglar alarm control panel.
Different mounting plates (e.g. hiplex, distributor,…) are available.
The rotatable back panel allows the cables to be inserted from below or above.

For tamper detection when removing it from the mounting surface, a breakaway detector is available as an accessory.

Intrusion alarm panel
– Connection technology spring-loaded terminals
– Up to 15 independent fuse areas and 1 central protection area can be
implemented- 3 com2BUS strings (2 physically separated) for control panels, door modules, detector group modules and other peripheral devices
– 2 separate interfaces for connecting comlock/cryplock readers
– 2 separate BUS-1 strings (for 63 BUS-1 addresses each)
– 16 conventional detector groups
– 3 relay outputs
– 15 transistor outputs +12 V switching
– 6 transistor outputs GND-switching

Housing S110
– 1 mounting station with hiplex / S110/S120 mounting plate and hiplex 8400H intrusion alarm panel (included)
– 3 mounting stations for the installation of one installation plate each (not included)
– Recessed plate hiplex / S110/S120
– Mounting plate comXline / S110/S120
– Mounting plate hilock 5500 / Type 1 / S110 / S120
– Mounting plate hilock 5500 / Type 2 / S110 / S120
– Mounting plate distributor / power supply / S110/S120
– Mounting plate router / S110/S120
– Blank installation plate / S110/S120
– 5 universal mounting stations
– 3 parking spaces for 12 V / 26 Ah battery or 6 12 V / 12 Ah parking spaces
– Environmental class according to VdS 2110 Class II
– Operating temperature -10 °C to +55 °C
– IP40 degree of protection
– Material: Housing: Sheet steel, powder-coated
– Dimensions (WxHxD) 670x800x250 mm

– Current consumption approx. 95 mA
– supply voltage 230 V AC