Intrusion Alarm Panel complex 400H-FK S120

Intrusion Alarm Panel complex 400H-FK S120

VdS Class C (G 108026) Burglar Alarm Panel
VdS Class C (G 109100) Switching Device
EN 50131-3: Grade 2

The complex 400H is an intrusion and robbery alarm control panel in accordance with the provisions, regulations and guidelines DIN EN 50131 of VdS class C, VDE 0833 and the ÜEA guideline of the police. The control panel is suitable for use in the commercial, industrial and private sectors.

The control panel can be adapted to the respective requirements by means of various expansion boards.
Different housing types are available for the different expansion levels.
With the FGW 210 wireless gateway (installed in the complex 400H intrusion alarm control panel (housing type GR80, GR100) or externally connected to the com2BUS), components can be integrated into the intrusion alarm control panel by radio.
The control panel thus combines all the advantages of a wired system with those of a wireless alarm system.
The reader interface for connecting comlock/cryplock readers can be used not only as a switching device but also for access control. The intrusion detector control panel is installed in a sturdy, sealable sheet steel housing with cable entries.
The 12 V / 26 Ah power supply is integrated on the central circuit board. A mounting station is available for the installation of a TELENOT transmission device.

The control panel is parameterized on site or remotely using the “compasX” parameterization software.
With the BuildSec 4.0 alarm system app, it is possible to operate and display operating states in the intrusion alarm control panel in conjunction with a comXline series transmission device via smartphone and tablet. Supported operating systems
are iOS and Android.

The compasX-User parameterization software offers the customer, operator, and security services functions such as reading the event memory or controlling the system remotely via a virtual control panel.

Characteristics
– Bus-oriented system, based on the TELENOT com2BUS system bus-
Up to 8 independent fuse areas and 1 central protection area can be
implemented- Up to 128 signal areas can be
parameterized- Up to 320 codes can be
parameterized- First detector detection
– Walk test function
– One-man inspection
– Operation with switch-on and alarm delay (lock function) possible
– Max. 208 conventional detector groups can be connected
– 2 to 8 separate BUS-1 strings (for 63 BUS-1 addresses each)
– 2 to 8 separate com2BUS strings for control panels, door modules, storage panels and other peripherals
– 2 to 24 separate interfaces for connecting any comlock/cryplock reader for switching and access control
– Event memory (1365 events)
– Long-term radio memory (1365 events)
– 3 to 28 relay outputs
– 21 to 196 transistor outputs
– Expandable with up to 3 comslaves
– Expandable with up to 16 modules comlock 410 / hilock 203 / TM2 C2B
– Expandable with 2 FGW 210 wireless gateways
– Parallel and serial interface (for detailed message transmission and remote service) to the transmission device
– App-capable (alarm system app BuildSec 4.0)
– hiXServer-capable
– Interface for networking with building management system / EIB/KNX
– Integrated power supply 12 V / 26 Ah
– Additional power supplies can be connected
– Parameterizable or remotely parameterizable with compasX parameterization software

Intrusion alarm control panel complex 400H-FK in housing type S120.
The S120 enclosure is a modular enclosure and offers 8 mounting locations for mounting plates.
One of the 8 assembly stations is equipped with a complex / S110/S120 installation plate and a complex 400H-FK intrusion alarm control panel.
Different mounting plates (e.g. complex, distributor,…) are available.
The rotatable back panel allows the cables to be inserted from below or above.

For tamper detection when removing it from the mounting surface, a breakaway detector is available as an accessory.

Intrusion alarm panel
– Connection technology spring-loaded terminals
– Up to 8 independent fuse areas and 1 central protection area can be
realized- 2 separate com2BUS strings for control panels, door modules and storage panels
– 2 separate interfaces for connecting comlock/cryplock readers
– 2 separate BUS-1 strings (for 63 BUS-1 addresses each)
– 16 conventional detector groups (expandable to 32 with MG/TA expansion board)
– 3 relay outputs
– 15 transistor outputs +12 V switching
– 6 transistor outputs GND-switching (expandable to 14 with expansion board MG/TA)

Housing S120
– 1 mounting station with mounting plate complex / S110/S120 and intrusion detector panel complex 400H-FK (included)
– 7 mounting stations for the installation of one installation plate each (not included)
– Mounting plate complex / S110/S120
– Mounting plate comXline / S110/S120
– Mounting plate hilock 5500 / Type 1 / S110 / S120
– Mounting plate hilock 5500 / Type 2 / S110 / S120
– Mounting plate distributor / power supply / S110/S120
– Mounting plate router / S110/S120
– Blank installation plate / S110/S120
– 4 parking spaces for battery 12 V / 26 Ah or 6 parking spaces 12 V / 12 Ah
– Environmental class according to VdS 2110 Class II
– Operating temperature -10 °C to +55 °C
– IP40 degree of protection
– Material: Housing: Sheet steel, powder-coated
– Dimensions (WxHxD) 800x1200x310 mm
– Colour RAL 9016 traffic white
– Weight approx. 65 kg