Intrusion Alarm Panel complex 400H-FK GR100 / BT800

Intrusion alarm control panel

complex 400H-FK GR100 / BT800

VSÖ-Class WS (W 091012/08E) Intrusion Detector Panel
VSÖ Class WS (W 110411/05 E) Switchgear
VdS-Class C (G 108026) Burglar Detector Panel
VdS-Class C (G 109100) Switchgear
EN 50131-3: Grade 2

The complex 400H is an intrusion and
robbery alarm control panel in accordance with the
provisions, regulations and
guidelines DIN EN 50131 of VdS class
C, VDE 0833 and the ÜEA guideline of the
police. The control panel is suitable for
use in the commercial, industrial
and private sectors.
The control panel can be adapted to the respective
requirements by means of various
expansion boards.
Different housing types
are available for the different expansion levels
.
With the FGW 210 wireless gateway (built-in
Components can be
integrated wirelessly into the intrusion alarm panel complex
400H (housing type GR80, GR100) or
externally connected to the
com2BUS).
The control panel thus combines all the
advantages of a wired system with
those of a wireless alarm system.
The reader interface for connecting
comlock/cryplock readers can be used not only
as a switching device but also
for access control.
The intrusion detector control panel is installed in a
sturdy, sealable
sheet steel housing with cable entries
.
The 12 V / 26 Ah power supply is integrated on the
central circuit board. An assembly station is available for the installation
of a TELENOT transmission device
. The
telephone junction box can be built over with the
control panel.
The control panel is controlled with the
parameterization software “compasX” Art.
100071098 parameterized on site or by
remote parameterization.
With the BuildSec alarm system app, it is
possible to operate and display
operating states in the
intrusion alarm control panel in conjunction
with a comXline series transmission device
via smartphone and
tablet. Supported
operating systems are iOS and Android.

Intrusion alarm panel complex 400H-FK
in housing type GR100 with touch
control panel BT 800.
A breakaway detector is available as an accessory
for tamper detection when removing it from
the mounting surface.