Spacer Set BLZ12/K -RAL 7024 Graphite Grey-

Spacer Set BLZ12/K -RAL 7024 Graphite Grey-

RFID readers cryplock BLM10 D identify contactless transponders and optionally freely configurable keypad codes. With the cryplock BLM10 D RFID readers, encrypted transmission based on MIFARE DESFire with 128-bit AES encryption is possible. This is in line with the highest encryption standards. The compatibility between transponder, RFID reader and evaluation unit can be found on the TELENOT website under: Downloads / Documents & Technical Descriptions / Switching Device/Access Control / Transponder / Compatibility. The cryplock BLM10 D RFID readers can be connected to the following devices: – Intrusion alarm panels of the complex 200H/400H series – Hiplex 8400H intrusion control panels – Comlock 410 door module – Hilock 5500 evaluation and control unit – Hilock 565 door module – FWA-BM basic module (unencrypted) The operating states are signalled directly on the reader with 3 LEDs and a piezo signal transmitter. The spacer block in combination with the ferrite foil reduces the absorption of the RFID reader on metallic surfaces such as stainless steel, aluminum or sheet steel. This ensures the proper functioning of the RFID reader on a metallic surface. The self-adhesive ferrite film can be attached to the back of the RFID keyboard reader BLM10/K. The spacer block is attached directly behind the RFID reader and increases the distance to the mounting surface by approx. 7 mm.