comXline 3516-2 Installation Kit Used

comXline 3516-2 USED in working order

Kit

Was only in action for a short time! (wrong telephone connection)
Comes with up-to-date firmware.

VSÖ class WS (W 110411/02 E)
VdS No. G 110802
EN 54-21

The devices are used to transmit
hazard messages (burglary, robbery, fire,
etc.) and technical alarms
(operating states, limit values,
faults).
They can be operated on:
– Multi-device connection (point-to-end)
Multipoint)
– System connection (point-to-point)
The comXline
3516 transmission device belongs to the generation of next-generation
IP transmission devices.
There are 3 transmission paths available
: the ISDN telephone connection,
the Ethernet connection and the GSM
radio connection (comXline 3516-2 (GSM only)).
The messages
can be transmitted either as voice or digital
protocol VdS 2465 or SIA Contact ID
(SIA DC-05) via the ISDN telephone connection and the
GSM radio channel. The messages
in the VdS 2465-S2 or Contact
ID (SIA DC-09) protocol are transmitted via the
Ethernet port.
The devices comply with the guidelines
VdS 2463, DIN EN 50136 and
take into account the guidelines VdS
2465-S2 (protocol extension TCP) and
VdS 2471-A13 (connection to TCP/IP).
The GSM device is suitable for use
in fire alarm systems in accordance with DIN 14675
and EN 54-21 and for
intrusion alarm systems in accordance with DIN EN 50131-1
.
With breakaway detector, the
transmission device meets the
requirements of DIN EN 50131-10 Grade
3.
Free menu-guided parameterization
is possible on site or remotely with the
PC parameterization software “compasX”.

ComXline 3516-2
transmission device installation kit.
The installation kit is intended for installation in
corresponding TELENOT empty enclosures or
in TELENOT intrusion alarm panels
.