Transmission device comXline 3516-2 (LTE) GR80

Transmission device comXline 3516-2 (LTE) GR80

VSÖ class WS (W 110411/03 E)
VdS No. G 110803
Certificate of constancy of performance (VdS) 0786-CPR-20969
EN 54-21

Transmission equipment transmits hazard messages (burglary, robbery, fire, etc.) and technical alarms (operating states, limit values, faults).
They can be operated on:
– Multi-device connection (point-to-multipoint)
– System connection (point-to-point)
There are 3 transmission paths available: the Ethernet connection, the ISDN telephone connection and the mobile connection (comXline 3516-2 (LTE/GSM only)).

Depending on the transmission path, the messages can be transmitted as voice, e-mail, SMS, digital protocol VdS 2465/SecurIP or Contact ID.
The transmission equipment complies with the guidelines VdS 2463, DIN EN 50136 and takes into account the guidelines VdS 2465 and VdS 2471 including the extension VdS 2471-S1.
The mobile phone variant is suitable for use in fire alarm systems in accordance with DIN 14675 and EN 54-21 and for burglar alarm systems in accordance with DIN EN 50131-1.

With breakaway detector, the transmission device meets the requirements of DIN EN 50131-10 Grade 3.
With the compasX parameterization software, parameterization is possible on site via the USB interface or remotely.

General features
– Parallel S1 interface according to VdS 2463 with 8 signaling line inputs
– Can be expanded to 200 alarm lines with the CXF extension module
– com2BUS interface for connecting an EMZ or expansion modules
– Detailed message transmission (plain text messages)
– Activation of the reporting lines by opening, closing or as a status function; the minimum duration and resistance monitoring can be parameterized individually
– The minimum signal duration for activating the signal lines can be parameterized, so that short pulses do not lead to an alarm being triggered
– 32 target numbers with 32 digits each can be parameterized
– 32 identification numbers with 12 digits each can be parameterized
– Free assignment of the target numbers as well as the identification numbers and the dialing sequence to the reporting lines
– Number of calls (number of cycles) and waiting time (cycle time) can be parameterized
– Fault relay output
– Universal, parameterizable relay output
– 1 remote relay output
– Expandable to 96 remote switching relays with CXF expansion module
– Universal relay FS10, e.g. for router reset
– Built-in event memory (2046 events) with real-time clock
– Remote service via all transmission paths and USB interface
– Remote service of the ÜE (query, diagnosis, online mode, parameterization, flashing)
– Remote service of EMZ complex (query, parameterization, remote control)
– Onboard backup battery

Features Ethernet port
– Interface: 10/100 Mbit/s (autonegotiation)
– Channels: up to 4 standing connections
– Data volume with standing IP connection approx. 200 MB/month (protocol dependent)
– Message transmission:
– VdS SecurIP
– VdS 2465-S2
– SIA DC-09 Contact ID
e-mail (unencrypted)

Features of the ISDN connection
– Operation on the PBX connection as well as on the multi-device connection possible
– Blockage activation and tamper activation of the So-BUS-
Layer 1 monitoring for continuous function control of the ISDN connection
– Operation according to the international standard DSS1
– Message transmission:
– VdS 2465
– SIA DC-05 Contact ID
language (dynamically organized
voice memory with 240 s)

Features of mobile communications (comXline 3516 (LTE/GSM))
– Continuous automatic monitoring of mobile network availability
-Mobile:
– 4G LTE Cat 1 (LTE band: 3, 7, 20)
– 2G GPRS/EDGE (900 MHz / 1800 MHz)
– GSM message transmission:
– VdS 2465
– SIA DC-05 Contact ID
-SMS
– Speech (dynamically organized speech memory with 240 s)
– Message transmission IP:
– VdS SecurIP
– VdS 2465-S2
– SIA DC-09 Contact ID
– E-mail (unencrypted) for GSM
– On-demand connection
– Data volume per message transmission approx. 1.5 kB
– Standing connection
– Data volume with a standing IP connection approx. 200 MB/month (protocol dependent)

CXF 16/8
– Expands the transmission device by 16 message line inputs and 8 remote switching outputs

CXB
– CXB-M: Interface BMA according to DIN 14675
– CXB-D: Interface for diode main detector
– CXB-F: Interface for frequency main detector

comXline 3516-2 (LTE) transmission device with radio replacement path in housing type GR80.

For tamper detection when removing it from the mounting surface, a breakaway detector is available as an accessory.

Transmission
– ISDN (multi-device connection)
– ISDN (system connection)
– Ethernet (IP)
– Mobile network

Housing GR80
– 1 parking space for battery 12 V / 7.2 Ah
– 1 mounting space for built-in power supply NT 7500
– environmental class according to VdS 2110 Class II
– Operating temperature -10 °C to +55 °C
– Protection class IP40
– Dimensions with antenna (WxHxD) 310x375x126 mm
– Dimensions without antenna (WxHxD) 310x275x126 mm
– Cable length antenna 2.5 m
– Colour housing door RAL 9016 Traffic white
– Colour housing lower part RAL 9006 White aluminium

– Current consumption at rest approx. 100 mA (at 12 V), with active Ethernet interface
current consumption at rest approx. 150 mA (at 12 V), with an additional IP connection via mobile radio
supply voltage 10.2 V DC to 30 V DC