Plug-in power supply SN 1

Plug-in power supply SN 1

The FWF-5 is used for the wireless transmission of messages or commands in the reliable ISM band. For this purpose, different transmitter components are available that act on a common or several receivers. FWF-5/HSxx handheld transmitter for the wireless triggering of switching commands, e.g. robbery alarm, home emergency call, control and switching processes of devices and systems, etc. The “+N” versions have a built-in tilt switch, which triggers a pre-alarm buzzer after approx. 20 s in a horizontal position and the 8th switching command automatically after a further 7 s. With built-in battery control indicator. -HS 3 up to 3 switching f. -HS 8 up to 8 switching f. -HS 2+N up to 2 switchgears u. 1 Schaltbef. via inclination switch -HS 7+N up to 7 switching switches u. 1 Schaltbef. via inclination switch detector transmitter FWF-5/MS for wireless transmission of an alarm from a connected sensor or detector (e.g. magnetic contact, glass break sensor, etc.) as well as for additional fault transmission in the event of battery undervoltage. Infrared motion detector FWF-5/IR with built-in radio transmitter, for wireless transmission of the alarm with additional fault transmission in the event of battery undervoltage. Building transmitter FWF-5/GS for the wireless transmission of up to 8 alarms from connected sensors or detectors (e.g. magnetic contacts, glass break sensors, motion, smoke and gas detectors, etc.) as well as for additional interference transmission in the event of a faulty power supply. Receiver FWF-5/E3 receiver for receiving up to 3 radio commands and interference messages from the above transmitters. 3 telecontrol outputs, 1 relay output (interference) and an LED (interference). The FWF-5/E3 receiver can process a system address. FWF-5/E receiver for receiving and decoding up to 16 radio commands and interference messages from the above transmitters. 17 telecontrol outputs freely assignable to radio commands, 1 relay output “interference”, 2 transistor outputs for acoustic messages. The FWF-5/E receiver can process up to 4 system addresses. FWF-5/EA receiver as described above, but with additional LCD display, real-time clock and serial printer interface. The menu-guided parameterization using the PR 7000 ArtNr 100071090 programming device enables fast and user-friendly parameterization of the device. For the parameterization of the handheld transmitters (HS) or the receivers E3, a spec. Programming adapter (FWF-5/PA, ArtNr 100035371 and Programmer FWF-5/PR, ArtNr 100035370) required. Plug-in power supply SN 1 for the power supply of electronic components.