Wireless alarm system compact easy 200H-FK/ 2516 (LTE)/ BT 801 uP / V4

Wireless alarm system compact easy 200H-FK/ 2516 (LTE)/ BT 801 uP / V4

VSÖ class GS-N (GS-N 200608/06 E) VdS class A (G 109708) Switchgear H (H 108001) Burglar alarm panel VdS class A (G 108701) Burglar alarm panel H (H 109010) Switchgear EN 50131-3: Grade 2 The wireless security system DSS2 A (VdS system recognition S 109705) enables the integration of wireless components in intrusion alarm panels complex 200H/400H. With the help of up to 2 FGW 210 wireless gateways, connected to the com2BUS of the EMZ, wireless detectors are connected to the EMZ. This turns a conventional EMZ into a hybrid EMZ. The special feature of radio is the propagation of radio waves through walls and across property boundaries, etc. However, this initially useful feature can be disruptive if several radio components use the same radio frequencies in close proximity. Since these states can change constantly, a procedure is necessary that automatically switches from occupied to unoccupied radio channels if necessary, without messages being lost. One such method is TELENOT’s MCRT® automatic frequency management system. For the DSS2, the ISM frequency band (433.05 MHz to 434.79 MHz) is divided into 12 radio channels according to TELENOT’s own channel grid. The MCRT system automatically selects three undisturbed channels for data transmission. If one channel is influenced by other radio activities during operation, it is automatically switched to the other, undisturbed, channel. All DSS2 radio components work bidirectionally and are therefore able to send and receive messages. The wireless range of the wireless components depends on the local conditions and can vary depending on the number and type of walls and ceilings to be penetrated. This roughly corresponds to the range ratios that are also known from a cordless phone. The wireless alarm system is parameterized with the compasX parameterization software. The compact easy wireless alarm system is intended for use in the private and small commercial sector. The intrusion alarm control panel manages two security areas and is suitable for the construction of medium-sized security systems in accordance with the VdS guidelines (class A), VdS-Home and VDE 0833. With the integrated FGW 210 wireless gateway, components can be integrated into the intrusion alarm system by radio. The control panel thus combines all the advantages of a wired system with those of a wireless alarm system. A comXline 2516 (LTE) easy transmission device is integrated into the control panel for alarm transmission. The operation of this transmission device is only possible in conjunction with a complex 200H-FK easy intrusion detector control panel. There is only a serial connection to the intrusion alarm control panel and a reduced number of subscriber types (via landline (la/lb) only subscriber type “voice” is possible). The BuildSec 4.0 alarm system app enables convenient operation and visualization of the wireless alarm system via smartphone.