Evaluation and control unit hilock 5500 S7

Evaluation and control unit hilock 5500 S7

VSÖ class WS (W 200608/04 E) VdS class C (G 118047) switchgear The hilock 5500 serves as an evaluation and control device, which is parameterized via the compasZ 5500 management software. SD card technology makes commissioning easy and fast. All data of the hilock 5500 is backed up to the microSD card. Since the personal authorizations are stored in the hilock 5500, it is still possible to operate the doors if the Ethernet interface fails. Via inputs and outputs of the hilock 5500 or expansion modules, the hilock 5000 ZK access control system can be individually adapted to the specific requirements of various objects. The hilock 5500 evaluation and control unit serves as a switching device for combinations between EMA and ZK systems. A remote switching device in accordance with VdS guidelines can be implemented by using the 410 hl 5000 add-on board via the com2BUS interface. The hilock 5000 ZK access control system incorporates the typical TELENOT reader behavior. By holding the transponder forward for a long time (longer than 3 seconds), a connected intrusion detector control panel is activated. With a short hold (shorter than 3 s), the intrusion alarm control panel is disarmed and access is released via the hilock 5500 evaluation and control unit. Arming/disarming as well as access control can be carried out with the same keypad code or transponder. The authorization assignment is carried out exclusively with the compasZ 5500 management software. Thanks to the implemented MIFARE DESFire 128-bit AES protocol, the encryption of the transponder data corresponds to the current state of the art. RFID write readers can be used to write encrypted transponder applications to MIFARE DESFire transponders. Evaluation and control unit hilock 5500 installed in sheet steel housing, housing type S7.