Deutsch
-
×
Door module comlock 410 aP mounting/ soldering distributor/ K30 1 × € 457,20Incl. tax -
×
Compressed air connection CC 25 PVC 1 × € 61,20Incl. tax -
×
Flange DF 25 ABS 1 × € 124,80Incl. tax
-
×
Detector base SDB 3000 white 1 × € 12,48Incl. tax
-
×
Cleaner (1000 ml) for glue joints 1 × € 49,56Incl. tax
-
×
Replacement Cartridge Flow-Check (PU 3 pcs.) 1 × € 171,60Incl. tax
-
×
Angle AN 25-45 ABS (Pack of 10 pcs) 1 × € 86,40Incl. tax
-
×
Glue PVC (125 g) 1 × € 21,00Incl. tax
Compressed air connection CC 25 PVC 
Flange DF 25 ABS 
Detector base SDB 3000 white 
Cleaner (1000 ml) for glue joints 
Replacement Cartridge Flow-Check (PU 3 pcs.) 
Angle AN 25-45 ABS (Pack of 10 pcs) 
Glue PVC (125 g) 
Flange DF 25 ABS
Part Number: 100078151 The flange enables a stable
fastening as well as a professional
transition of the suction line into
ventilation ducts.
The flange DF 25 ABS is PA
Available on backorder
Flange DF 25 ABS
The flange enables stable fastening and professional transition of the intake line into ventilation ducts. The DF 25 ABS flange is suitable for the TU ABS intake manifold.
| Hersteller |
|---|
Related products
Smoke Aspiration System
Part Number: 100078155 The CC 25 ABS compressed air connection is suitable for use in the MV 25 ABS and MV 25 ABS SH three-way ball valves.
Smoke Aspiration System
Part Number: 100078153 The MV 25 ABS SH three-way ball valve is designed for cleaning the intake line of aspirating smoke detectors with compressed air and can be inserted directly into the
Smoke Aspiration System
Part Number: 100078565 replacement sensor kit for the Grizzle air sampling smoke detector. The SSK1 Grizzle sensor kit consists of a fan and 2 sensor chambers for smoke detection.
Smoke Aspiration System
Part Number: 100078150 The SP M20 ABS ceiling bushing set is suitable for the TU ABS intake pipe. The set is needed to collect air samples from a room with critical environmental conditions.
Smoke Aspiration System
Part Number: 100078154 The pipe blow-out valve is used in rooms with very high dust load at the end of the pipe. When cleaning with compressed air, the pipe blow-out
Smoke Aspiration System
Part Number: 100078545 The filter protects the sensors from contamination by fine dust and dirt. The filter is supplied complete with frame (5 sets of 2 pieces each), for
Smoke Aspiration System
Part Number: 100078134 The pipe blow-out valve is used in rooms with very high dust load at the end of the pipe. When cleaning with compressed air, the pipe blow-out
Smoke Aspiration System
Part Number: 100078152 The MV 25 ABS three-way ball valve is designed for cleaning the intake line of air intake smoke detectors with compressed air and can be fed directly into the suction