Blow-out device ADB 1000
Part Number: 100078076 The ADB 1000 blow-out device is used in
rooms with very high dust loads
to automatically clean an intake line
with compressed air.
Blow-out device ADB 1000
The ADB 1000 blow-out device is used in rooms with very high dust loads to automatically clean a suction line with compressed air. The blow-out device is installed directly in the suction line of the SecuriRAS ASD air sampling smoke detector. The blow-out time can be set to 10 or 30 seconds. The blow-out cycle can also be adjusted according to the ambient conditions, so that cleaning is carried out either hourly or every 4, 8 or 24 hours.
| Weight | 8,18 kg |
|---|---|
| Hersteller |
Related products
Smoke Aspiration System
Part Number: 100078134 The pipe blow-out valve is used in rooms with very high dust load at the end of the pipe. When cleaning with compressed air, the pipe blow-out
Smoke Aspiration System
Part Number: 100078141 The 90° bend BE 25 ABS is suitable for the intake manifold TU ABS.
Smoke Aspiration System
Part Number: 100078143 The TP 25 ABS Tee is suitable for the TU ABS intake manifold.
Smoke Aspiration System
Part Number: 100078149 AD 20 ABS threaded ring as a threaded transition between the ABS tube with Ø 25 mm and the FT 21 PA hose with Ø 21.2 mm via the quick-release connectors
Smoke Aspiration System
Part Number: 100078137 With the adhesive PVC, the fittings are securely connected to the suction pipe TU PVC .
Smoke Aspiration System
Part Number: 100078147 The SJ 25 ABS fitting is suitable for the TU ABS intake manifold. With the help of the screw connection, a detachable connection can be created in the pipe system .
Smoke Aspiration System
Part Number: 100078155 The CC 25 ABS compressed air connection is suitable for use in the MV 25 ABS and MV 25 ABS SH three-way ball valves.
Smoke Aspiration System
Part Number: 100078135 The CC 25 PVC compressed air connection is suitable for use in the MV 25 PVC and MV 25 PVC SH three-way ball valves.